Charging your Delvfire Ignite

Difficulty charging?

If you've run through the charging procedure below and your tracker is still not charging, double check the following:

  • Ensure that the metal charging strips at one end of the tracker are facing the contact strips inside the USB socket, it's easy to plug-in the tracker the wrong way round which will result in it not charging.
  • Try charging your tracker in a number of different USB sockets (mobile chargers tend to be the most reliable)
  • If the red light on the tracker is coming on but the screen isn't lighting up when you touch the function button (grey oval) at the bottom of the tracker's screen, we recommend contacting our support team for further assistance.

Charging

Remove both straps from the body of your tracker to expose the 2 gold coloured USB charging strips. If you're finding it difficult to remove the straps, try rocking the strap side-to-side whilst pulling it away from the body of the tracker. You may need to use more force the very first time you remove the new straps from your tracker. 

Plug in the body of your tracker directly into a USB socket, ensuring that the 2 gold coloured charging strips on the tracker are facing the 4 charging contacts inside the USB socket

 

Once plugged into a USB socket, a red light will illuminate and a charging icon will appear on screen (Fig. 3) to indicate that your tracker is charging. If the red light does not illuminate, check that you have plugged in your tracker the correct way round, and that the gold coloured charging strips at the end of the tracker are facing the 4 contacts inside the USB socket. Your tracker will take approximately 1 hour to fully charge, after which time the red light will go out to indicate that it’s fully charged. A full charge should last around 5-7 days under normal operating conditions.

Tip: You can charge your tracker using a USB socket on any computer, phone/tablet charger or power bank.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.